Ethernet Introduction - Casio QT-8000 Service Manual

5-13. Ethernet Introduction

5-13-1. Introduction
The QT-8000 is equipped with high performance Plug & Play Ethernet interface which is
fully compliant with IEEE802.3 standard, and consisting of RJ-45 connector.
5-13-2. Network Driver Installation under Windows XP
This describes in detail the important steps when installing the VIA VT6103 network drivers
under WinXP.
IMPORTANT: During WinXP installation, do not attempt to install your Sound Card &
Network Adapter hardware outright; doing so will install the older version of
the device drivers within the WinXP setup program.
After completing the WinXP installation, user must do the following action upon first-time
entry into WinXP.
1. Launch the Control Panel window
• Select the Start button at the bottom left corner of the screen then click on Settings.
• Choose Control Panel from the left and the following window appears on your
display.
2. Access the System Properties window
• Double-click on System icon and then choose Device Manager from the menu.
• A new window will pop-up with Other Device represented by a "?" mark. Click this "?"
mark and one device marked with "?" appears on this subset device list. One device
specifies the VIA Rhine II Fast Ethernet Adapter.
3. Enter the VIA Rhine II Fast Ethernet Adapter
• Move the cursor to the VIA Rhine II Fast Ethernet Adapter then double-click your left
mouse button. The screen then display the VIA Rhine II Fast Ethernet Adapter.
4. Detect and specify the .INF network device driver path
• Click on Driver from the menu bar and a new screen appears with the Update
Driver ....button.
• Click on the this Update Driver .....button and the Update Device Driver Wizard
window appears. Choose "Display a list of all drivers..." then click on the Next>
button to proceed.
• Insert the driver disk into USB CD-ROM and clock on Have Disk.
- 46 -