Parental Controls - TP-Link TL-WR802N User Manual

300mbps wireless n nano router
Hide thumbs Also See for TL-WR802N:
Table of Contents

Advertisement

Chapter 5
ICMP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current ICMP-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
Enable UDP-FLOOD Filtering
UDP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
Enable TCP-SYN-FLOOD Attack Filtering
function.
TCP-SYN-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
Ignore Ping Packet From WAN Port
ping packet from the internet cannot access the router.
Forbid Ping Packet From LAN Port
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click Save.
4. Click
5. 9.
Parental Controls allows you to block inappropriate and malicious websites, and control
access to specific websites at specific time for your children's devices.
For example, you want the children's PC with the MAC address 00:11:22:33:44:AA can
access www.tp-link.com on Saturday only while the parent PC with the MAC address
00:11:22:33:44:BB is without any restriction.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Tick the
in the
Downloaded from
ManualsNet.com
Blocked DoS Host List

Parental Controls

Parental
Controls.
Enable Parental Controls
MAC Address of Parental PC
search engine
Configure the Router in WISP Mode (Hotspot Mode)
- The default value is 50. Enter a value
- Tick the checkbox to enable this function.
- The default value is 500. Enter a value
-Tick the checkbox to enable or disable this
- The default value is 50. Enter a value
- The default setting is disabled. If enabled, the
- The default setting is disabled. If enabled, the
to display the DoS host table by blocking.
checkbox, enter the MAC address 00:11:22:33:44:BB
field and then click Save.
95

Advertisement

Table of Contents
loading

Table of Contents