Chapter 7
1 ) Enter the MAC address 00:0A:EB:B0:00:0B / 00:0A:EB:00:07:5F in the MAC
2 ) Enter wireless client A/B in the Description field.
3 ) Select
4 ) Click
7. The configured filtering rules should be listed as the picture shows below.
Done!
Now only client A and client B can access your network.
7. 4. 4.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
•
Transmit Power
router.
Downloaded from
ManualsNet.com
Address field.
Enabled
in the Status drop-down list.
Save
and click Back.
Wireless Advanced
Wireless
>
Wireless
Advanced.
- Select High,
High
is the default setting and recommended.
search engine
Configure the Router in Range Extender Mode
Middle
or
Low
which you would like to specify for the
150