Wireless - TP-Link TL-WR802N User Manual

Chapter 5
• Subnet Mask
255.255.255.0 is used as the subnet mask.
Note:
• If you have changed the IP address, you must use the new IP address to log in.
• If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP Server will be
configured automatically, but the Virtual Server and DMZ Host will not take effect until they are re-configured.
5. 3. 3.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the WAN MAC address and click Save.
• WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
managing the router. If the MAC address is required, you can click
and this MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect until the
connection is re-established.
5. 4.
5. 4. 1.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the basic settings for the wireless network and click Save.
Downloaded from ManualsNet.com
- An address code that determines the size of the network. Normally
MAC Clone
Network > MAC Clone.
- This field displays the current MAC address of the WAN port.
Restore Factory MAC
- This field displays the MAC address of the PC that is

Wireless

Basic Settings
Wireless > Basic Settings.
search engine
Configure the Router in WISP Mode (Hotspot Mode)
to restore the MAC address of WAN
WAN MAC Address field.
Clone MAC Address
76