TP-Link TL-WR802N User Manual page 57

Chapter 4
•
•
Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers are set up
improperly. You should contact your ISP to get DNS server addresses.
Static IPv6
•
•
•
•
•
•
•
Downloaded from ManualsNet.com
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
Enable MLD Proxy - Enable the Multicast Listener Discovery (MLD) Proxy
function if you need.
Set IPv6 DNS Server manually
addresses, select Set IPv6 DNS Server manually
and Secondary IPv6 DNS Server
servers will be assigned from ISP dynamically.
IPv6 Address - Enter the IPv6 address provided by your ISP.
Prefix Length - The length of IPv6 address prefix.
IPv6 Gateway - Enter the default gateway provided by your ISP.
IPv6 DNS Server- Enter the DNS IPv6 address provided by your ISP.
Secondary IPv6 DNS Server
your ISP.
MTU(Bytes) - The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
Enable MLD Proxy - Enable the Multicast Listener Discovery (MLD) Proxy
function if you need.
search engine
Configure the Router in Wireless Router Mode
- If your ISP gives you one or two DNS IPv6
and enter the
into the correct fields. Otherwise, the DNS
- Enter another DNS IPv6 address provided by
IPv6 DNS Server
53