TP-Link TL-WR802N User Manual page 132

Chapter 6
6. 4. 4.
Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
I want to:
Deny or allow specific wireless client devices to access my network by their MAC
addresses.
For example, you want the wireless client A with the MAC address 00:0A:EB:B0:00:0B
and the wireless client B with the MAC address 00:0A:EB:00:07:5F to access the router,
but other wireless clients cannot access the router
How can I do that?
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Click
4. Select
filtering rule.
5. Delete all or disable all entries if there are any entries already.
6. Click
1 ) Enter the MAC address 00:0A:EB:B0:00:0B / 00:0A:EB:00:07:5F in the MAC
2 ) Enter wireless client A/B in the Description field.
3 ) Select
4 ) Click
7. The configured filtering rules should be listed as the picture shows below.
Downloaded from ManualsNet.com
Wireless MAC Filtering
Wireless > Wireless MAC
Enable to enable the Wireless MAC Filtering function.
Allow the stations specified by any enabled entries in the list to access
Add New and fill in the blank.
Address field.
Enabled in the Status drop-down list.
Save and click Back.
search engine
Configure the Router in Access Point Mode
Filtering.
as the
128