TP-Link TL-WR802N User Manual page 141

Chapter 6
6. 7. 2.
Enable this function if you want to have remote control through SNMPv1/v2 agent with
MIB-II.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Select Enable, configure the parameters and click Save.
• System Name
• System Description
• System Location
• System Contact
node.
• Trap Manage IP
6. 7. 3.
The Ping Watch Dog is dedicated for continuous monitoring of the particular connection
to remote host using the Ping tool. It makes the router continuously ping a user defined
IP address (it can be the internet gateway for example). If it is unable to ping under the
user defined constraints, the router will automatically reboot.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the settings and click Save.
Downloaded from ManualsNet.com
SNMP Settings
System Tools > SNMP Settings.
- An administratively-assigned name for this managed node.
- The software version information for this managed node.
- The physical location of this node.
- The textual identification of the contact person for this managed
- Displays the IP address of the host to receive the traps.
Ping WatchDog
System Tools > Ping WatchDog.
search engine
Configure the Router in Access Point Mode
137