Chapter 6
6. 7. 5.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
default values.
•
•
•
•
6. 7. 6.
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
•
To backup configuration settings:
Click
Backup
of the current settings will be stored in your computer.
•
To restore configuration settings:
1. Click
click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note:
During the restoring process, do not power off or reset the router.
Downloaded from
ManualsNet.com
Factory Defaults
System Tools
>
Factory
Default Username: admin
Default Password: admin
Default
IP
Address: 192.168.0.1
Default
Subnet
Mask: 255.255.255.0
Backup & Restore
System Tools
>
Backup &
to save a copy of the current settings in your local computer. A ".bin" file
Choose File
to locate the backup configuration file stored in your computer, and
search engine
Configure the Router in Access Point Mode
Defaults. Click
Restore
Restore.
to reset all settings to the
139