TP-Link TL-WR802N User Manual page 142

Chapter 6
• Enable
• Destination IP
sending ping packets.
• Interval
• Startup Delay
restarted.
• Fail Count
value is overrun, the router will restart automatically.
6. 7. 4.
TP-Link is dedicated to improving and richening the product features, giving users a
better network experience. We will release the latest firmware at TP-Link official website
www.tp-link.com. You can download the lastest firmware file from the
our website and upgrade the firmware to the latest version.
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
3. Go to
4. Click
Downloaded from ManualsNet.com
- Turn on/off Ping Watch Dog.
- The IP address of the target host where the Ping Watch Dog Utility is
- Time interval between two ping packets which are sent out continuously.
- Time delay before first ping packet is sent out when the router is
- Upper limit of the ping packets the router can drop continuously. If this
Firmware Upgrade
System Tools > Firmware
Choose File to locate the downloaded firmware file, and click Upgrade.
search engine
Configure the Router in Access Point Mode
Upgrade.
Support page of
138