TP-Link TL-WR802N User Manual page 22

Chapter 4
• Username/Password
fields are case-sensitive.
• Addressing Type
or Static IP. Click the
button to disconnect immediately.
• MTU(Bytes)
recommended that you change the default MTU Size unless required by your ISP.
• Enable IGMP Proxy
multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration
for client devices, such as the modem router. The default value is enabled, and if you
are not sure, please contact your ISP or just leave it.
• Connection Mode
•
•
•
Downloaded from ManualsNet.com
- Enter the username and password provided by your ISP. These
- Choose the addressing type given by your ISP, either Dynamic IP
Connect
- The default MTU size is "1460" bytes, which is usually fine. It is not
- IGMP (Internet Group Management Protocol) is used to manage
Always On - In this mode, the internet connection will be active all the time.
Connect on Demand - In this mode, the internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
Connect Manually - You can click
immediately. This mode also supports the
search engine
Configure the Router in Wireless Router Mode
button to connect immediately. Click the
Connect/Disconnect
Max Idle Time
Disconnect
Max Idle Time
to connect/disconnect
function as Connect
18