TP-Link TL-WR802N User Manual page 24

Chapter 4
•
•
•
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the internet continually in the background.
BigPond Cable
If your ISP provides BigPond cable connection, please select
• Username/Password
fields are case-sensitive.
• Auth Server
• Auth Domain
• MTU(Bytes)
change the default MTU size unless required by your ISP.
Downloaded from ManualsNet.com
Always On - In this mode, the internet connection will be active all the time.
Connect on Demand - In this mode, the internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
Connect Manually - You can click
immediately. This mode also supports the
on Demand mode. The internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
- Enter the username and password provided by your ISP. These
- Enter the authenticating server IP address or host name.
- Type in the domain suffix server name based on your location.
- The default MTU size is 1500 bytes. It is not recommended that you
search engine
Configure the Router in Wireless Router Mode
Connect/Disconnect to connect/disconnect
Max Idle Time
Max Idle Time
BigPond
Max Idle Time
function as Connect
because some
Cable.
20