Chapter 4
Done!
Now only client A and client B can access your network.
4. 4. 5.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
•
Transmit Power
router.
•
Beacon Interval
here. Beacon Interval value determines the time interval of the beacons. The beacons
are the packets sent by the router to synchronize a wireless network. The default
value is 100.
Downloaded from
ManualsNet.com
Wireless Advanced
Wireless
>
Wireless
Advanced.
- Select High,
High
is the default setting and recommended.
- Enter a value between 40-1000 milliseconds for Beacon Interval
search engine
Configure the Router in Wireless Router Mode
Middle
or
Low
which you would like to specify for the
28