TP-Link TL-WR802N User Manual page 162

Chapter 7
7. 6. 6.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
You can change the factory default username and password of the router.
It is strongly recommended that you change the default username and password of the
router, for all users that try to access the router's web-based utility or Quick Setup will
be prompted for the router's username and password.
Note:
The new username and password must not exceed 15 characters and not include any spacing.
3. Click Save.
7. 6. 7.
This feature allows you to block computers on the LAN from accessing the router by
using the MAC/IP-based authentication.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
• Allow all LAN conencted devices to manage the router locally
1. Keep the
manage the router.
2. If you want to access the router via both HTTPS and HTTP, please tick the
checkbox in
3. Keep the local management port as default if you don't know which port to use.
4. Click Save.
Downloaded from ManualsNet.com
Account Management
System Tools > Administrator, and focus on the
Local Management
System Tools > Administrator, and focus on the
Available Host (IP/MAC)
HTTPS Service column. Otherwise, keep it disbled.
search engine
Configure the Router in Range Extender Mode
Account Management
Service Configuration
empty, which means you don't specify any host to
section.
section.
Enable
158