Wireless - TP-Link TL-WR802N User Manual

Chapter 6
• Type
to configure IP address manually.
• MAC Address
• IP Address
select
• Subnet Mask
255.255.255.0 is used as the subnet mask.
Note:
• If you have changed the IP address, you must use the new IP address to log in.
• If you select
• If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP Server will be
configured automatically, but the Virtual Server and DMZ Host will not take effect until they are re-configured.
6. 4.
6. 4. 1.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the basic settings for the wireless network and click Save.
Downloaded from ManualsNet.com
- Either select Smart IP(DHCP)
- The physical address of the LAN ports. The value can not be changed.
- Enter the IP address in dotted-decimal notation of your router if you
Static IP (the default one is 192.168.0.1).
- An address code that determines the size of the network. Normally
Smart IP(DHCP), the DHCP server of the router will not start up.

Wireless

Basic Settings
Wireless > Basic Settings.
search engine
Configure the Router in Access Point Mode
to get IP address from DHCP server, or Static IP
123