Switch Settings For The Intelligent Function Module - Mitsubishi Electric MELSEC Q Series User Manual

4 SETUP AND PROCEDURE BEFORE STARTING THE OPERATION

4.5 Switch Settings for the Intelligent Function Module

4 - 12
Downloaded from ManualsNet.com
This section explains the intelligent function module switch settings.
Make intelligent function module switch settings in I/O assignment setting on GX
Developer.
Making intelligent function module switch settings allows you to set to the Q64TC the
output status to be established when the programmable controller CPU has comes to
an error stop.
Refer to Section 3.2.12 for setting details.
(1) Setting items
Five switches (switch numbers 1 to 5) are available for the intelligent function
module and they are set with 16 bit data.
If the switches for the intelligent function module are not set, the default value of
0 is used for switches 1 to 5.
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
search engine
Setting items
H
CH4
CH3 CH2 CH1
Reserved
Reserved
Reserved
Reserved
MELSEC-Q
Output setting for CPU stop error
0 : CLEAR
Other than 0 : HOLD
4 - 12