Mitsubishi Electric MELSEC Q Series User Manual page 141

6 PROGRAMMING
6 - 9
Downloaded from ManualsNet.com
(b) Auto refresh setting (Refer to Section 5.5)
Write Data Error Code................................................"W150"
CH1 Temperature Process Value (PV)......................"W151"
(c) Intelligent function module parameter write (Refer to Section 5.3.3)
The intelligent function module parameters are written to the remote I/O
station.
Perform this operation on the parameter setting unit selection screen.
(d) Execution of auto tuning in monitor/test setting (Refer to Section 5.6)
Auto tuning is executed in the procedure shown on the screen.
CH1 Auto Backup ......................................................."Yes"
search engine
MELSEC-Q
6 - 9