Program Example Using The Utility Package - Mitsubishi Electric MELSEC Q Series User Manual

6 PROGRAMMING

6.3.1 Program example using the utility package

6 - 8
Downloaded from ManualsNet.com
(1) Operating GX Developer
(a) Network parameter setting
• Network type
• Head I/O No.
• Network No.
• Total number of (slave) stations : 1
• Mode
• Network range assignment
• Refresh parameters
(2) Operating the utility package
(a) Initial setting (Refer to Section 5.4)
CH1 Input Range ......................................................"2"
CH1 Set Value (SV) Setting......................................"200"
CH1 Alert1 Mode Setting .........................................."UprLmt Input"
CH1 Alert Set Value1................................................"500"
CH1 Upper Setting Limiter........................................"400"
CH1 Lower Setting Limiter ........................................"0"
CH2 Unused Channel Setting..................................."Not Used"
CH3 Unused Channel Setting..................................."Not Used"
CH4 Unused Channel Setting .................................."Not Used"
search engine
MELSEC-Q
: MNET/H (remote master)
: 0000
H
: 1
: Online
:
:
6 - 8