Technical Data - DAITEM 221-21 Series Manual

10. Technical data

Technical data
Built-in magnetic contact
Connection terminal block
for external contact
Maximum number of external
contacts per terminal block
Maximum length
of connection loop
Use
Power supply
Battery life
Radio links
Test pushbutton
Two-colour LED indicator lamp
Operating temperature
Anti-tamper protection
Degrees of mechanical protection IP 30 / IK 04
Dimensions L x W x H
Weight
110
Universal transmitter
1 reed switch type contact
• terminal block n° 1
• terminal block n° 2
5
10 m
indoor
DAITEM 3.6 V 4 Ah BatLI26 lithium battery pack
• 4 years (if both loops used)
• 5 years (if only 1 loop used)
TwinBand :
®
• 433.050 MHz - 434.790 MHz, 10 mW max,
Duty cycle: 10%
• 868 MHz - 870 MHz, 25 mW max, Duty cycle: 0,1%
1 (on front face)
• red: loop n° 1
• green: loop n° 2
-5°C to +55°C
• against opening
• against removal
• against loop cutting (if anti-tamper external contact
connected)
165 x 35 x 35
120 g
To obtain advice when installing your system
or before returning equipment, please contact
the Daitem technical support team (see telephone
number at the back of the alarm system
installation manual) or check the web site at:
www.daitem.co.uk
A team of qualified technicians will advise you
what to do.
Hager Security SAS hereby declares that the radioelectric
equipment, reference 221-21X, complies with the
requirements of the following 2014/53/EU RE-D directive.
The full text of the EU Declaration of Conformity is available
at the address: www.daitem.co.uk.
Non-contractual document, may be modified without prior notice.