DAITEM 221-21 Series Manual page 102

Configuration example: configuring an "Armed, Partial 1" order to be transmitted when loop n° 2 is activated (see table on page 99).
Press 6 times to
Start
select the parameter
Checking configuration: check configuration by selecting the parameter number and checking the number of corresponding flashes.
Start Press 6 times
parameter number
102
6
Press once
to confirm
number (6). selection
6
Press once
to select the to confirm
selection
2 5
1 sec.
Press twice then 5 times
to select the parameter value (25)
2
End Parameter value 25 is confirmed
approx.
2 sec.
End
5
2 sec.
by 2 then 5 flashes