Table of Contents
Advertisement
3
If you have not assembled the microscope yet, please read "8 Assembly" (P. 16) (page 16 to 18).
TIP
3-1 Reparation
1. Confirm the mounting, particularly that of the observation tube. ....................................................................................................................................... Page 16 to 18
2. Adjust the rotation tension of the focus adjustment knob. . .........................................................................................................................................................................Page 6
3. Prepare the light source as required.
3-2 Procedure
Downloaded from
ManualsNet.com
Observation procedure
a
b
search engine
1
Place the specimen on the stage. (Page 6)
2
Adjust the interpupillary distance. (Page 6)
3
Adjust the eyepiece diopter. (Page 7)
(
The adjustment operation is variable whether the eyepieces
use an eyepiece micrometer disk or not.
4
Set the zoom adjustment knob a for the lowest magnification and
rotate the focus adjustment knob b to bring the specimen into
approximate focus.
5
Rotate the zoom adjustment knob a to the target magnification
and rotate the focus adjustment knob b to bring the specimen into
accurate focus.
When the optional AS unit (SZX-AS) is used, the contrast of
TIP
image and the focal depth of specimen can be adjusted with
the aperture iris diaphragm lever.
SZX7
Ref. Page
)
5
Advertisement
Table of Contents
