Cup Stage Szh-Sc - Olympus SZX7 Instructions Manual

9-6 Cup stage SZH-SC

1
External view and nomenclature
NOTE
Specimen holder mount holes
2
Installation
NOTE
TIP
1
Fit the cup stage seat into the stage plate mount hole of an applicable stand.
2
Place the cup stage on the seat. Before placing, wipe the sliding surface on the cup stage and seat with a clean cloth.
3
Mount the stage plate.
4
Mount the specimen holder.
TIP
24
Downloaded from ManualsNet.com
The SZH-SC can be used only with reflected light illumination. It cannot be used with transmitted light
illumination.
Finger hook
Stage plate*
Before mounting, remove dirt and dust from the mount surfaces and handle carefully so as not to
damage them.
STAD mount for ILLT SZX2-STADM is necessary for using the SZX2-ILLTQ/ILLTS LED transmitted light
illumination base. For details, refer to the instruction manual for the SZX2-ILLTQ/ILLTS LED.
Specimen holder
Stage plate Stage plate
Sliding surface
Stage plate mount hole
Clean the sliding surface periodically.
search engine
Tube
Specimen holder mount hole
4
Cup stage
3
Seat
2
1
Cup stage
Tilting limit angle: 30°
Specimen holder
Seat
Same size as the stage plate.
Applicable stand Applicable stand