Table of Contents
Advertisement
8
8-1 Assembly diagram
The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of
assembly.
Assembly steps enclosed in
NOTE
Eyepiece clamping knobs
Eyepiece clamping knobs
Observation tube clamping screw
Observation tube clamping screw
Loosen using an Allen screwdriver
Body clamping knob
16
Downloaded from
ManualsNet.com
Assembly
will be detailed on the subsequent pages.
When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid
scratching any parts or touching glass surfaces.
Eyepieces
WHSZ series
4
3
2
Objective
Stage plate
SZ2-SPBW
5
Standard stand
SZ2-ST
search engine
Binocular tube
SZX-BI45
Intermediate attachment
Zoom microscope body
SZX-ZB7
Auxiliary sleeve
SZ2-ET
1
* To utilize the ESD protection performance, be sure to ground the
equipment using a grounding lead wire having a 4 mm banana plug.
Tools required
Allen screwdriver
(Provided with the zoom microscope body)
Allen screwdriver holder
Attach to a position that does not hinder
operation.
The adhesive force weakens
NOTE
when dust is attached to the
adhesive surface. Be sure to
remove dust before attaching.
Ground lead wire
(for 4 mm banana plug) *
.
Advertisement
Table of Contents
