Olympus SZX2-LTTR Instructions

Ergonomic long tilting trinocular
SZX2-LTTR
This product is the "ergonomic long tilting trinocular" used in combination with the stereo microscope series SZX7,
SZX10 or SZX16. For usage not described in this instruction manual, refer to the instruction manual for your microscope.
1
Handling precautions
· This product is a precision instrument. Handle it with care and avoid subjecting it to a sudden or severe impact.
· Never disassemble any part of the product. Otherwise, failure could be caused.
· For cleaning, storage and operating environment of this product, refer to the instruction manual for your microscope.
· Before disposing of this product, be sure to follow the regulations and rules of your local government.
· Do not use this product with the following product combinations. Otherwise the microscope may be tilted or fall over.
• LED transmitted light illumination base (SZX2-ILLTQ/ILLTS) + Optional column (SZH-P400/SZH-P600) + Fluorescence units
2 Affixing the magnification indication sticker
Observation image is expanded 1.25 times (1.25X) by using SZX2-LTTR. When you use the SZX2-LTTR with the stereo
microscope series SZX7 or SZX10 in combination with the 1X or 0.75X objective, the observation magnification excluding
the eyepiece ("objective magnification" x "zoom magnification" x "trinocular observation tube magnification") can be
checked easily by affixing the magnification indication sticker provided with SZX2-LTTR to the zooming knob of the zoom
microscope body.
Note: The indexes on this sticker cannot be used if you replace the SZX2-LTTR with another observation tube.
1 Turn the zooming knob of the zoom microscope body to set to the
minimum magnification.
2
1
2 Peel the magnification indication sticker off and affix it on the
magnification indexes of the right zooming knob. At this time, be sure
that the minimum magnification index of the right zooming knob is
overlaid on the index at the top of the sticker.
NOTE
For details of observation magnification, see tables on section 5.
3
Attaching the extender for camera adapter SZX2-LTTRAD
When using the SZX2-LTTR with camera, the extender for camera adapter SZX2-LTTRAD and the camera adapter have
to be attached onto the SZX2-LTTR. Use the Allen screwdriver provided with the stereo microscope to attach the units.
1 Loosen the clamping screws a (2 positions) of the camera port.
d
2 Insert the extender for camera adapter SZX2-LTTRAD b to the camera
port, and tighten the clamping screws a .
c
b 3
Loosen the clamping screw c (1 position) of the female dovetail of
the SZX2-LTTRAD.
4 Insert the camera adapter d to the female dovetail of the SZX2-
a
LTTRAD, and tighten the clamping screw c .
5
Attach the camera and adjust the parfocality referring to the instruction
manual of the camera adapter.
AX8807 03 Issued in March, 2019
INSTRUCTIONS
· Affix the magnification indication sticker securely to the
zooming knob. Otherwise, the sticker may peel off during use.
· The magnification indication sticker can only be affixed to the
right zooming knob.
4
Specifications
Item
Type
Magnification
Tube inclination adjustment range
Interpupillary distance adjustment range
Light path selection
Dimension
Weight
5
Observation magnifications and observation areas (using SZX2-LTTR)
· "Observation magnification" = "objective magnification" x "zoom magnification" x "eyepiece magnification" x 1.25
· "Observation area" = "eyepiece field number" / ("objective magnification" x "zoom magnification" x 1.25)
SZX7 (zoom magnification: 0.8 to 5.6 X)
Eyepiece magnification (field number)
Objective 10X (field number 22) 15X (field number 16)
mag.
Observation Observation Observation Observation
mag. (X) area (mm) mag. (X) area (mm)
0.5X 5.00 to 35.0 44.0 to 6.29 7.50 to 52.5 32.0 to 4.57
0.75X 7.50 to 52.5 29.3 to 4.19 11.3 to 78.8 21.3 to 3.05
1X 10.0 to 70.0 22.0 to 3.14 15.0 to 105 16.0 to 2.29
1.25X 12.5 to 87.5 17.6 to 2.51 18.8 to 131 12.8 to 1.83
1.5X 15.0 to 105 14.7 to 2.10 22.5 to 158 10.7 to 1.52
2X 15.8 to 158 11.0 to 1.57 30.0 to 210 8.00 to 1.14
SZX10 (zoom magnification: 0.63 to 6.3 X)
Eyepiece magnification (field number)
Objective 10X (field number 22) 15X (field number 16)
mag.
Observation Observation Observation Observation
mag. (X) area (mm) mag. (X) area (mm)
0.5X 3.94 to 39.4 55.9 to 5.59 5.91 to 59.1 40.6 to 4.06
0.75X 5.91 to 59.1 37.2 to 3.72 8.86 to 88.6 27.1 to 2.71
1X 7.88 to 78.8 27.9 to 2.79 11.8 to 118 20.3 to 2.03
1.25X 9.84 to 98.4 22.3 to 2.23 14.8 to 148 16.3 to 1.63
1.5X 11.8 to 118 18.6 to 1.86 17.7 to 177 13.5 to 1.35
2X 15.8 to 158 14.0 to 1.40 23.6 to 236 10.2 to 1.02
SZX16 (zoom magnification: 0.7 to 11.5 X)
Eyepiece magnification (field number)
Objective 10X (field number 22) 15X (field number 16)
mag.
Observation Observation Observation Observation
mag. (X) area (mm) mag. (X) area (mm)
0.3X 2.62 to 43.1 83.8 to 5.10 3.94 to 64.7 61.0 to 3.71
0.5X 4.38 to 71.9 50.3 to 3.06 6.56 to 108 36.6 to 2.23
0.8X 7.00 to 115 31.4 to 1.91 10.5 to 173 22.9 to 1.39
1X 8.75 to 144 25.1 to 1.53 13.1 to 216 18.3 to 1.11
1.6X 14.0 to 230 15.7 to 0.96 21.0 to 345 11.4 to 0.70
2X 17.5 to 288 12.6 to 0.77 26.3 to 431 9.16 to 0.56
Specifications
Tilting trinocular observation tube
1.25 X
5 to 45 °
57 to 80 mm
Light path selector knob IN: eyepiece 100%
Light path selector knob OUT: eyepiece 50%, camera 50%
271(W) x 160(D) x 115(H) mm (excluding projections)
2 kg
20X (field number 12.5) 30X (field number 7)
Observation Observation Observation Observation
mag. (X) area (mm) mag. (X) area (mm)
10.0 to 70.0 25.0 to 3.57 15.0 to 105 14.0 to 2.00
15.0 to 105 16.7 to 2.38 22.5 to 158 9.33 to 1.33
20.0 to 140 12.5 to 1.79 30.0 to 210 7.00 to 1.00
25.0 to 175 10.0 to 1.43 37.5 to 263 5.60 to 0.80
30.0 to 210 8.33 to 1.19 45.0 to 315 4.67 to 0.67
40.0 to 280 6.25 to 0.89 60.0 to 420 3.50 to 0.50
20X (field number 12.5) 30X (field number 7)
Observation Observation Observation Observation
mag. (X) area (mm) mag. (X) area (mm)
7.88 to 78.8 31.7 to 3.17 11.8 to 118 17.8 to 1.78
11.8 to 118 21.2 to 2.12 17.7 to 177 11.9 to 1.19
15.8 to 158 15.9 to 1.59 23.6 to 236 8.89 to 0.89
19.7 to 197 12.7 to 1.27 29.5 to 295 7.11 to 0.71
23.6 to 236 10.6 to 1.06 35.4 to 354 5.92 to 0.59
31.5 to 315 7.94 to 0.79 47.3 to 473 4.44 to 0.44
20X (field number 12.5) 30X (field number 7)
Observation Observation Observation Observation
mag. (X) area (mm) mag. (X) area (mm)
5.25 to 86.3 47.6 to 2.90 7.88 to 129 26.7 to 1.62
8.75 to 144 28.6 to 1.74 13.1 to 216 16.0 to 0.97
14.0 to 230 17.6 to 1.09 21.0 to 345 10.0 to 0.61
17.5 to 288 14.3 to 0.87 26.3 to 431 8.00 to 0.49
28.0 to 460 8.93 to 0.54 42.0 to 690 5.00 to 0.30
35.0 to 575 7.14 to 0.43 52.5 to 863 4.00 to 0.24
Optical Microscope Accessory