Table of Contents
Advertisement
3
Operation
· Do not touch the sliding surface on the cup stage and seat with a hand. If the sliding surface are contaminated
NOTE
with oil, etc., wash with a neutral detergent before use.
· If an eccentric load of more than 20 grams is applied to the edge of the cup stage, it may move spontaneously.
· When a tall specimen is placed and the cup stage is tilted, the specimen may go out of focus. In this case,
adjust the focus again.
Downloaded from
ManualsNet.com
search engine
1
Place a specimen on the stage plate, hold the cup stage by the edge,
and tilt the cup stage slowly.
If the specimen slips on the stage plate, hold the specimen
TIP
with the provided specimen holder.
To fix a container such as a petri dish, insert the provided tube into
the specimen holder to fix the container by pinching.
SZX7
25
Advertisement
Table of Contents
