Table of Contents
Advertisement
4-3 Microscope body
10
Downloaded from
ManualsNet.com
a
d
c
b
search engine
1
Zoom magnification indication
The body zoom magnification is indicated on zoom adjustment knob
(right) a .
The total magnification can be calculated with the following formula.
Total
Objective
=
magnification
magnification
Magnification indication ring
An objective other than the 1X model is provided with a
TIP
magnification indication ring. Use the ring having indication
"SZX7" with the SZX7 microscope.
1
Widen the magnification indication ring b and fit into the deep part
of the left zoom adjustment knob c so that the indicated figures can
be read from the front of the microscope.
2
Gently turn the magnification indication until it clicks into the
predetermined position.
The magnification indication ring can also be attached
NOTE
on the right zoom adjustment knob, but the microscope
zoom magnification indication is hidden in this case.
2
Switching the click stop ON-OFF
The click stop function provides a click stop for each zoom
TIP
magnification value indicated on the zoom adjustment knob.
When the click stop function is switched OFF, the zoom
magnification can be adjusted finely around each zoom
magnification value.
1
To switch the click stop function ON, turn the click stop screw d
clockwise (in the direction of the arrow) all the way until it is stopped
using the Allen screwdriver.
A click stop is provided for each zoom magnification value indicated
on the zoom magnification indication a .
2
To switch the click stop function OFF, turn the click stop screw d
counterclockwise (in the opposite direction to the arrow) by about 2
turns using the Allen screwdriver.
To prevent damaging the microscope cover and internal
NOTE
mechanism, do not turn the screw excessively.
Body zoom
Eyepiece
x
x
magnification
magnification
Advertisement
Table of Contents
