Advertisement
Quick Links
INSTRUCTIONS
SZX-DA
DRAWING ATTACHMENT
This instruction manual is for the Olympus SZX-DA drawing attachment. To ensure the safety,
obtain optimum performance and familiarize yourself fully with the use of this product, we
recommend you study this manual thoroughly before operating the equipment. Retain this
instruction manual in an easily accessible place near the work desk for future reference.
A X 7 1 8 9
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Olympus SZX-DA
Summary of Contents for Olympus SZX-DA
- Page 1 SZX-DA DRAWING ATTACHMENT This instruction manual is for the Olympus SZX-DA drawing attachment. To ensure the safety, obtain optimum performance and familiarize yourself fully with the use of this product, we recommend you study this manual thoroughly before operating the equipment. Retain this instruction manual in an easily accessible place near the work desk for future reference.
- Page 2 IMPORTANT Getting Ready 1. This manual describes the SZX-DA drawing attachment only. Before using this equipment with the SZX microscope and associated options, make sure that you have carefully read and understood the corresponding manuals, and understand how to use all components of the microscopic system in combination.
- Page 3 Caution If the equipment is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the equipment may also be damaged. Always operate the equipment as outlined in this instruction manual. The following symbols are used to set off text in this instruction manual.
-
Page 4: Table Of Contents
SZX-DA CONTENTS NOMENCLATURE ASSEMBLY DRAWING/OBSERVATION SETUP OBSERVATION PROCEDURE DRAWING MAGNIFICATION SPECIFICATIONS... -
Page 5: Nomenclature
NOMENCLATURE Positioning pin Mirror tube clamping knob Mirror tube Clamping screw Focusing handle Light shield cap... -
Page 6: Assembly
SZX-DA ASSEMBLY The diagram below shows how to connect this attachment to the microscopic system. The numbers in the diagram indicate the order of assembly. # When assembling the microscopic system, make sure that all parts are free of dust and dirt. Avoid scratching any parts or touching the glass surfaces. -
Page 7: Drawing/Observation Setup
DRAWING/OBSERVATION SETUP SZX-DA Focusing handle Mirror tube clamping knob Adjusts the focusing of the Clamps the mirror tube after drawing sheet. it has been pivoted to the de- sired position. Mirror tube Light shield cap Shields the light on the drawing side. -
Page 8: Observation Procedure
SZX-DA OBSERVATION PROCEDURE Placing the Drawing Sheet Place a drawing sheet directly below the mirror tube and fix so that it does not move. Adjusting the Mirror Tube (Fig. 1) Loosen the mirror tube clamping knob @, pivot the mirror tube so that it is Mirror tube perpendicular to the drawing sheet. - Page 9 Removing the Light Shield Cap (Fig. 2) The light shield cap should be removed and placed on the top of the mirror tube during drawing. # When microscopic observation is required while the drawing attach- ment is mounted on the microscope, attach the light shield cap on the drawing sheet side to shield the light.
-
Page 10: Drawing Magnification
SZX-DA DRAWING MAGNIFICATION Use the following procedure and formula to calculate the drawing magni- fication. Measuring Drawing Size D (Figs. 3 & 4) Place the scale line on the drawing sheet, look into the eyepiece and read the size of the drawing field, D. -
Page 11: Specifications
SPECIFICATIONS Item Specification Light Intensity Ratio 50% observation, 50% drawing Focusing Range 200 mm (working distances 250 to 450 mm) Intermediate Magnification Total magnification reading on the zooming knob Drawing Magnification 6.3 x }With the standard base, 1X objective and 10X eyepiece (For other combina- tions, see Section 5, “DRAWING MAGNIFICATION”.) Drawing Size 138 mm dia. - Page 12 MEMO...
- Page 13 MEMO...
- Page 14 2-43-2,Hatagaya, Shibuya-ku, Tokyo, Japan Postfach 10 49 08, 20034, Hamburg, Germany 2 Corporate Center Drive, Melville, NY 11747-3157, U.S.A. 491B River Valley Road, #12-01/04 Valley Point Office Tower, Singapore 248373 2-8 Honduras Street, London EC1Y OTX, United Kingdom. 104 Ferntree Gully Road, Oakleigh, Victoria, 3166, Australia This publication is printed on recycled paper.
Need help?
Do you have a question about the SZX-DA and is the answer not in the manual?
Questions and answers