Motorola SABER I User Manual page 89

Multlple Repeater Access @des -
MDC 600
Seleaing this option allows you to treat the
RAT switches
as
MDC (600) repeater a@ess
devices.
The radio can have a maximum
of 8
track-rnoded
repeater lDs. Each of the
RATs can be
tied to a single tone
or
MDC. The MDC lDs tor repeater access can
be entered in a popup
window
upon selection of this opt'pn. The valid range of the lDs is from 0000 - 9999. This option
is irrconpatible with unit lD MDC (PTQ options requiring MDC 1200
(H959/F1962H967/H946),
and
also
with H742.
lf
you select thls option, the following options will be enabled
:
H619 -
Omil MDC side Tones
H770
- MDC Pretime Delay - 300 ms
H771
- MDC Pretime Delay - 700 ms
H779
- MDC Non-standad Pretirne Delay
Multiple Bepeater Access Cotles -
MDC 1200
Selecting
this option allows you to treat the RAT
suritches
as MDC (1200) repeater
a@ess
devices.
The radio can have a maximrm
of 8
track-moded repeater lDs. Each of the
RATs can be
tied to a single tone
or
MDC. The MDC lDs
,or
repealer access can
be entered
an
a popup
window upon selection ol this option. The valid range ol the lDs
is
from 0000 - 9999.
This option
is
incompatible
with unit lD MDC (PTD options requiring MDC-1200
(H958/H961/H963/H923),
and
also
with H742.
ll you select this option, the lollowing
optaons
will be enabled
:
H619 - Omit MDC
skJe
Tones
H770
- MDC Pretime Delay
- 300 ms
H771
- MDC Pretime Delay - 700 ms
H779
- MDC Non-standad Pretime Delay
H549 - 8D Master Option (Advanced STATALERT)
Sebaing
thas
option will give you access to MDC
Decode Fealures that are avaitable
to
Saber
radios possessing a
Pass 8D Core and using MDC-1200 signalling. Options irrcompatible with
this leature are Quik Call, Single Tone and any MDC-600 feature. Some Pass 6D options
are
also comrnon
to the Pass 8D radio. These include: Zero Audio Enable, Timed
Arto
Reset, Auto
Reset Carrier
Ovenide.
lf
you select this option, the lollowing options willbe
enabled:
Zero
Audio Enable
Remote Monitor
MDC-1200
CallAlert
MDC-1200 lndividual Selective Call
MDC-1200
Goup
Selective Call
Radb
Check
This leature allows a dispatcher the means
to determine if a radio is on and operataonal via an
RF command. Radio check
as
automatically enabted
lor a pass 8D
radio and can be used
provided
a valkj MDC unil lD exists in the radio. MDC decode must be enabled on the channel
that the radio check command was issued
in
orderto
work correctly.
Radio tnhibit
This leature allows a dispatcher the means
lo
render a radio 'dead" via an RF command. The
radio can be "brought back to life"
by issuing a cancel radio inhibit command or
by
reProgEmming the radio with the RSS. Radio inhibit is automaticalty enabled for a pass 8D rado
and can
be used provided a valid MDC unil lD exists in the
r:adio.
MDC decode must be enabled
on the channel that the radio inhibit command was issued
in
orderto work
conec;tly.
82
Appendix
- 5. Options List and Delinitions