Motorola SABER I User Manual page 80

Failure
to
include this
oflion
when using an intrinsically safe battery
is characterized by
a
premature indication
ol a
low-battery condition. For
SABER I radios (no display),
this option is
only required when
option H906 (low battery LED) is selected,
H958
-
Unit
lD
-
MDC 600
Selecting
this option defines an
MDC
600 lD to the radio, where 600 refers to a 600 baud rate.
The portable
user
can send out his unit
lD
whenever PTT is activated, deactivated, or
both. There
will be one unit lD per radio channel. The transmission of the user's lD will allow the base
operabr
b
track
roice
oommunications
on a given channel.
Sidetones
will be heard (if enabled)
while
the lD
is being transmited.
You can
enter
a
4 digit hexadecimal lD in the range from
0001
to DEEE, exctuding any occurrence
of
a hexadecimal
F.
Trailing Unit lD
is
rpt
available on secure
radios.
H959
-
Unlr
rD
.
UDC
12oO
Selecting this option deftnes an MDC 1200 lD to the radio, where 1200
referslo a
1200 baud rate.
This option's description
is
identical to that
of MDc 600
(H958) except for
the baud
rate
of 1200.
H961
-
Unlt
lD and
Emergency
-
MDC 600
This option allows you
to
enter
a unit hexadecirnal tD
for MDC 600 in the range from 0001 to
DEEE, excluding any occurrence of a hexadecimat
F.
By pressing the
emergency button located
on
the
top panel of
the radio, the
radio
goes
to
the preprogrammed emergensy channel and sends
out an alarm.
lf emergency is
transmitted
while scan
is
running, the emergency opcodes
will go
out
on
the channel that a transmit last
occurred (this may or may not
be
the home channel).
H962
-
Unlt
lD and
Emergency
-
MDC 1200
This option behaves identical to Unit lD and Emergency
-
MDC
600 (H961) except that it
functions at
1200
baud. This option
is
incornpatible with scan options H273
andH%.
H963
-
Unit
lD
W
Audlble Emergency
-
MDC 600
This option allows you to enter a
unat
hexadecimal
lD for MDC 600 in the range from 0001
to
DEEE, excluding
any occurrence of
a
hexadecimal
F.
You
can go to the preset emergency
channel
by pressing the emergency button located on the top panel of the
radio.
When the
emergency
button is pressed, the radio sends out the emergency sequence and simultaneously
generates side tones each time the sequence is transmitted. The radio will
remain on the
emergency
channel unless you press PTT to
transmit. lf emergency is
transmitted while scan is
running, the emergency opcodes will
go out on the channel that
a
transmit last
occurred (this may
or may
not be
the home channel).
H967
-
Unlt lD
W
Audible Emergency
-
MDC
1200
This option behaves identically to Unit lD
W
Audible Emergency
-
MDC
600 (H963), except
hat
it
functions
for
1200
baud. lf
emergency
is transmitted while scan is running, the
emergency
opcodes
will go out on the channel that
a transmit last
occurred (this may or may not be the home
channel).
H923
-
Unit
lD
WEmergency Revert
-
MDC 600
This option allows you
b
enter
a
unit hexadecimal !D
for MDC 600 in the range from 0001
b
DEEE, excluding any occurrence of a hexadecimal
F.
By pressing the emergency button located
on the top panel of the radio, the radio goes to ghe preprogrammed emergency channel, one for
each zone, transmlts
a
silent alarm,
and
then reverts back
to
the
channelthat you were on. A total
of 20 emergency packets are sent each time emergency is pressed. This option is
incompatible
with H707.
H946
-
Unit
lD
WEmergency Revert
-
MDC 1200
This option behaves identically to Unit lD WEmergency Revert
-
MDC 600, except that it
tunctions for
1200 baud. This option is incompatible with H707.
No
Channel Re-Revert After Emergency -
Selecting
this option will cause the radio to remairi
on the reverted channel after the completion of the emergency packet transmissions.
Any
subsequent transmissions
will be sent out the assigned Emergenry
Revert channel. Cancelling
this may be done by manually changing channels or by resetting the radio.
Scanned by
Bryan
Fields
bryan@bryanfields.net
Appendix
-
5. Options List
and
Delinitions
73