Motorola SABER I User Manual page 70

While scanning, all
non-priority channels
have equal
status. That is,
once activity is
detected
on a
non-priority channel, the scanning of other non-priority channels
is
stopped
until
canier
is
dropped. The
radio
willcontinue to scan priority one and prionty two however.
lf
activity is detected on
eather
of the pdority channels, the radio will drop the non-priodty
channel and begin monitoring the priony channel.
Prlorlty one is the
highest
pfunty
entry on
the list.
The radio wi!! monitor activity on this
channel
at
all
times.
When the radio detests
acti@ on the pdonty one channel, scan
wil!
monitor the priotity one channel exclusively, until canier is dropped ard then it wil!'resume
rprmalscan.
Prlorlty
tlro
is
the second highest priorrty on lhe list. When the radio detects activity on the
Prionty
two channel,
hrt
not on the priority one channel, scan will rnove
to the prbdty
two
channel, but continue to monitor the pdorily one channel. When canier is dropped on the
priofity two channel, scan will resume as normal.
Note: ll
MDC is enabled with Scan and a priority channel is set to be scanned or the
radio is equipped with a priority scan encryption module, DOS Muting will not
work properly.
The designated transmit channel defines the zone/channel combination that the radio will
transmit on wheneverthe PTT switch
is
pressed while
the
curent
list
is being scanned.
--Function-Key-Descriptions-
---
Delete Scan
list
- The
Delete Scan
list
lunction will delete the present scan lisl
being modilied or created including all data present..
Prlnt - This print lunction
will make a hard copy ol the Scan
list
menu.
Delete Entry - The Delete Entry lunction will delete the entry where the cursor
as
positioned. ll
you delete a
non-pdority channel in the middle
of a
non-priority scan
list
,
then each entry
afterthe
deleted entry will
be moved up one position.
F4
F5
F6
Change/Create/ViewRadioPersonality
63