Motorola SABER I User Manual page 83

H273
-
OperatorSelectable Scan
Selecting
this option will allow you
b
enter
or modify a unique scan list, using the l@ypad on the
radio,
wiUrout
he
aid of
he
RSS.
You
can select this option at
he same time as option H340 (mode
slaved
scan). lf both types of scan are present in your radio, you would choose the
tlpe
of scan
fiat
you want
to aclivaE by using the
hlee confol
keys on
the keypad. ln this option, the number
of pdority drannels (1 or 2) and the @signated transmit channelwill be user programmable. This
option allows you to enter one scan
list with
15 entsies;
his
list includes
2 priority channels, 12 non-
priority channels, and 1
enfy for
fie
designated transmit
channel. This option is not ofiered for
SABER
ll radios because the full keypad is not
available in
those mo@ls.
NOTE:
!f
MDC is enabled
on
he
radio and
priority scan is used, DOS
Muting
willnotwork properly
causing
the radio to unsquelcfi at
times
during MDC transmissions. This occtrs whether scan
is
running in
he
radio or not.
]1344
-
Mode Shved
Scan
(forSABER
11.8,
SABER
lll)
Selecting this option will give you
10 scan
liss with
13
entrbs
per
scan
list. The
13
entries include
2
priority channels, 10 nonpriority channels and 1 optional entry for designated transmit channel.
The two priodty
channels
will be
scanned more often than the non-priority channels and will
continue
to be scanned even if a
lower
pdority channelis curently being monitored. lf both priodty
channels are being used, the
channelwith priority
1
statls will
be able to override
the channelwith
priority 2 strtrs such that the pdority 1 channel will continue to be scanned even if the priority 2
channel is
acti\re. The priodty 2
channel
will
not be scanned if the scanner is
locked
on
the priodty
1
channel. ln
any
scan list it will be possible to omit either or both of the priority channels. For this
type
of scan,
each channel
an
the radio
points
to
one
of the
scan lists,
so you can assign
a
different
scan sequen@
to
each
channel. All channels and scan lists available in this option are factory
programmed,
butcan
be
changed
wih
the
Radio Service
Sottware.
NOTE:
lf MDC
is
enabled
on
the radio and
priority scan is used, DOS
Muting
will notwork properly
causing
he
radio to
unsquelctr
at times during MDC transmissions. This
oeurs
whether scan
is
running
in the radio or not.
2N
Fued Pnodg
Standard in
the radio is fixed first priority and a floating second priority. This option is available to
you to
make
fie
second priority status until you transmit on another channel while the radio is
scanning
with no activity. A second lixed priority can
not
be offered along with floating priority since
the floating priority already assumes 2nd priority stiatus. At scan
anitialization
the floating priority
channel will be the same as the
preassignecl
transmit
channel until you transmit on some other
channel. For each
scan list the preassigned transmit channel will always be
fie
channel on which
he
radio was,
when scan was entered.
Disable
this function
if you
want second floating priority.
Nuisane
M&
&lete
This option allows you
to temporarily delete non-priority channels from the scan
list that
are
constanty busy which may cause the scanner to be constantly locked onto a channel. A channel
deleted using this option will remain deleted untilscan is aborted. When scan is processed again,
allchannels which were previously
deleted
willbe replaed.
You
can activate this feature by using
he
SELECT and ENTER keys while
fte
radio
is locked
onto
the channelthat
is to
be deleted from
the scan
list.
This option is incompatible with autoscan.
*roll
Scan
Ust
This option allows you to view which channels are programmed
into
each scan
list.
Use MENU key
to select scrcll menu and press the SELECT key lo scrollthough the entire lisl.
76
Appendix -
5.
Options List and Definilions