Motorola SABER I User Manual page 36

11.
MICROPHONE GAIN
This
parancter
is
used when sending out the voice signal. There
are
4
dttlerent values lrom
which you can choose : -3 dB, 0 dB (default), +3 dB, and +6 dB. The radio has to
be
reprogrammed
to see the eflect
of
the change. This will only work on
radios
with the
H852,
6D master optbn
enabled or
the H549, 8D master option enabled.
(a)
Folbw the
setup procedure in Section Vl-A,
Fig.
8.
(b) Determine the microphone gain you wish to
have and use the UP/DOWN or
PGUP/PGDN arrow keys to increase/decrease these values.
(c)
Reprcgram radio il finished with
ALL
alignment functions.
once
you have completed
the radio level alignment adiustments, press the F10
key to
retum
to the SERVICE menu.
Servicing
lhe
Rac,io
29