Motorola SABER I User Manual page 16

I I
I. HARDWARE INSTALLATION
A.
Host Computer And Options Required
The following section
SABER Radio Service
provides
Software
the hardware and software requirements needed to
run the
@mputer:
IBM
PC
oT
CONVERTIBLE
IBM.XT
!BM-XT/286
IBM.AT
IBM-PS/2: Models 25. 30, 50, 60, 70,
or
80
Memory Required:
At
least
Atok
bytes of
RAM
Operatang
System:
The software requires the DOS Version 3.1 or later to
run
this
package.
Disk Storage:
The
sottware
will be available on both 3112'and 5 1/4' (RVN-4002K) media and must
be
installed onto a hard disk
drive.
However,
you can also
store
the data
liles on either
3112"
and
5
1/4"
disks.
@mmunication
Card:
A serial
port is also required
il
personality
files
are
to be read from
or
written to a raclio. The
serial
port
must
be
compatible with
the IBM asynchronous @mmunications
adapler.
Primer:
A paallel interlace
IBM compatible
printer
is
required if you plan to use
the print lacilities ol
the
software.
Monitor:
A
monochrome
or color monitor compatible with the IBM monochrome display
or
IBM
CGA/EGA adapter is
requirecl.
Hardware
lnstallalion
9