Motorola SABER I User Manual page 41

The only funaion key here that needs to be explained
is
PRINT SCREEN (F5) which will
print out
a hard copy of lhe screen shown.
Each
parametercan be adiusted one ol three ways:
The
UP
arow
key
will increase the parameter value. The DOWN anow key will
decrease
the parameter value.
The PGUP key will increase the parameterwith a rate increase ol
10
times its
present
value.
The PGDN key will decrease the rate of decrease by 10 times its present value.
ln the
,ollowirE sections below, each alignment parameter with its proper aligning procedures
are explained.
1.
Scan Monitor Hold Time
Monitor Hold Time determines how long the radio will remain on the npnitored channelonce
the
monitor
button is released. During monitor hold time, squelch and PL are not delealed
unless permanent rnonitor has been engaged. After Monitor Hold Time expires, permanent
monitor is released and normalchannel scan resumes. To align this scan parameter,lollow
the sleps below:
(a)
Set up according
to
Section Vl-A, Fig.
I
ancl
select the SCAN MONITOR HOLD TIME
option
in the Align Scan Menu.
(b)
lncrement or decrement the time parameter accordingly using the UP (or PGUP) or the
DOWN (or PGDN) arrow
keys.
(c)
Valid
time range is lrom $0t to $3C (1 to 60 seconds) with a defau[ value ol $03 or
3
seconds.
(d)
Repogram
radio il linished with
ALL alignment lunctions.
U
Servicing
the Radio