Motorola SABER I User Manual page 34

7.
DTMF
Dial Delay
This parameter controls the DTMF pretime. lts value ranges lrom $00 to $FF
an
steps o,
1.
To
see
the etfect of the change, the radio must first be
repogrammed.
(a)
Follow the setup procedure in Section Vl-A, Fig.
8.
(b)
Delermine the dial delay desired
ard
use
the
UP/DOWN
or PGUP/PGDN
arrow keys to
'
increase/decrease this
delay.
(c)
Repogram
radio
if
linished with ALL alQnment functions.
8.
DTMF Tone On Time
This parameter sets the DTMF tone duration. lts value ranges lrom $01 to $FF
(1 to
255) in
5
millisecond units
(5
ms
to
1.275
seconds). The default value is $0C, which is 60
ms.
When aligning DTMF Tone On Time, you
will nol be able to test lhe ON time until
you
reprogram
the radio tirst.
(a)
Follow the Setup Procedure
in
Section Vl-A, Fig.
8.
(b)
Determine
what tone duration you wish to have and use the UP/DOWN or PGUP/PGDN
anow keys lo increase/clecrease these
values.
-'
--
(cl
-Reprogram"radio-if
Jinished-with ALL alignment
runctions. -
9.
DTMF Tone
Off Time
This parameter delines the time between DTMF
tones. The value for this parameter ranges
lrom
$01
to $FF (1 to 255)
in
5 ms units (5
ms
to 1.275 seconds). The delault value is $1C,
which is
140
ms.
When aligning DTMF Tone Ofl Time, you will not be able to test the OFF
time until you reprogram the
radio
first.
(a)
Follow
the Setup Procedure in Seaion Vl-A, Fig.
8
(b)
Determine
what tone duration you wish to have and use the UP/DOWN or PGUP/PGDN
anow keys to increase/decrease lhese values.
(c)
Repogram
radio
it
linished with ALL alignment lunctlons.
10. Secure
Devaation
Ollset
This parameter delines a deviation
adjustment
that is applied during coded
transmissions.
You
can only alQn this value il you have a
radio
that has a voice privacy
moclule
installed.
l,
you selected option H432 in "Radio Feature Options,'then this adiustment is not
necessary.
The delault value is
0.
When aligning Secure Deviation Otlset, you can see the change
in
deviation during the alignment process or in "real time."
You
do not have to
reprogram the
radio to
see
the
immediate deviation
change.
To perlorm
this adiustment. lollow the
procedure given below.
(a)
Follow the
Setup Procedure in Section Vl-A, Fig.8.
Servicing
the
Radio
27