Motorola SABER I User Manual page 54

The lllodel
Number field selects the specific
model.
ThE legend at the right of the screen
will change as you scroll through the model types and display
the
major charactedstics of
each model. As with the
Model Category the
selectaon
made in this lield will afiect the
lolbwing lield for
Frequency Range.
Only nndels with.CN in the
last 2 characler positions
can be programmed into
a
6D radio.
The Frequency
Range field allows you to select a particular band within the
model
prevbusty selected.
Note that
lhis fietd may display several ditferent bands to choose
lom,
but be sure to select the poper band that rnrst match the radio you intend to prograrn.
Toggled options that change
in
conjunction to the three setections
above:
Power Level:
Frequerrcy Band:
Radio Type:
Display Type:
Keypad:
Bandwidth:
Scan Option:
LOWHIGH
UHF/VHFA{id-bancl
PORTABLE/SUBMERSIBLE
NO DISPLAY/FULL DISPLAY
NONEIS KEYS/FULL KEYPAD
NARROW
BANDMIDE
BAND
(VHF only)
SCAN
CAPABLE/-
Use
the
UP/DOWN arrow keys
to
select between the Ctear and Secure models and then
Press
the
ENTER key
to
move
to the next user seleclion. As you select the Model Number
and
Frequency Range, these parameters change again, and you
will be
able
to create
a
radio personality lile lor your
radio.
The next step in creating,your radio RPF is
lo
exil this
--screen-by
-pressing-F-l 0-and-select-your'-Radio
.Featu
re-Options:
Change/CreateruaewRadioPersonality 47