Motorola SABER I User Manual page 63

Quik-Caltll
Repeater lndex
RATI Furrtion
RAT2 Function
PTT Function
Pre/Deemphasis
MDC Decode
Emergenry PTT
DOS Muting
Valid Entries are 'Y' and 'N'.This field will be displayed if
H7011H70UH703
is selected. RX PL and Quik-Call
ll
are
incompatible
on
a
channel.
The Serial Number of the repeater unit lD in the Repeater
Access Codes table entered in
the
radio\options screen.
(Can be viewed while in the
channel inlormation screen
using
the F6 key).Example:lf you want to
send an Access
Code of 2357 through either (or both) of the RATS, and if
2357 was entered by you as the sth entry
in the table
earlier,then enter 5
lor
Repeater lndex in
the
channel
intormation
screen. You
will also need to
tie either (or both)
the
RATs
to 'M' lor this entry to be etfective. (The index is
same
lor RATI
and RAT2.)
This field will be displayed only if
either one of the Multiple Repeater Access options
is
chosen.
Valid entries are 1 or
2
(for single tones 1
or
2),M
(for
Repeater AcceSs
Code (MDC)), and'
'lor
no signalling.
This
field
willbe
displayed
only
it
the general single tones option
,
or one of the Multiple Repeater Access options is chosen.
Valid entries are 1 or
2
(for single tones 1 or 2),
M
(for
Repeater Access Code (MDC)),
and' 'for
no signalling.
This
field will be disphye<t only
if
the general single tones option
,
or one ol the Multiple Repeater Access options is chosen.
Valid entries are 1 or
2
(for single tones 1
or
21,
M (for
MDC), and
" lor
no signalling. This lield will be displayed
only il the general single tones option
is
choien
and the time
duration is not zero. (The MDC lD lield does not appear with
this field. lnstead, the
PTT
lield itself can be used for
signalling
MDC through PTT
-- by
entering M in the
PTTlield.)
Valid entries are
'Y'and
'N'. This field is atways displayed
for
any Saber Models. This fietd
is
used
when
a
rlat audio signal
is desired during transmit
ancl
receive. Selecting
Y'
(Default)
disables rlat audio
on
this channel.
Valid entries
are 'Y' and 'N'. This lield will be displayed if
a
Unit
lD
(meaning
any MDC ENCOOE/DECODE option)
is
present
and the Master 8D option is highlighted. Sebaing
'Y'
enables MDC Decode leatures on this channel. MDC
Decode is incompatible with Tx lnhibit.
Valid entries are
'Y'and'N'.
This lield
will
be displayed if
Emergency Gall is selected. Selecting
'Y'wil!
cause the
MDC lD
to
be transmitted whenever
the radio is
in
Emergency Call.
Valid entires
are'Y'and'N'.
This field
is
will be displayed
il
a
Unit
lD (meaning
any
MDC ENCODE option) is present and
the Master 8D (Mvanced STATALERT) gption is highlighted.
SebAing 'Y'enables
DOS Muting
on this channel.
56
Change/CreateA/iew Radio Personalily