Performance Data - Novexx Solutions 64 Series User & Service Manual

10/14 Rev. 03

Performance data

Print technology
Thermal direct printing, thermal transfer printing
Printhead
"Corner Edge" type
Resolution
12 dots/mm (300 dpi
Print speed
[Tab. 2] Print speeds of the 64-xx printers
Print speed 64-0x
Dispenser
[Tab. 3] The maximum print speed of the dispenser printers depends on the setting of the parameter SYS-
Print width (actual)
Output mode
1:1 and 100 % printable, either with or without cut.

1.
USER/SERVICE MANUAL
64-xx Gen. 2/3
1
)
Print speed
Printer
(mm/s)
64-04/05 50 to 406
64-06 50 to 359
64-08 50 to 229
(Unit interval 25,4 mm/s (1 "/s), respectively)
Printer
64-04/05 Dispenser
64-06 Dispenser
64-08 Dispenser
TEM PARMETERS > Transport mode. The values are recommendations, up to which proper functioning
of the printer is guaranteed.
•
64-04:106.6 mm
•
64-05:127.9 mm
•
64-06:159.9 mm
•
64-08:213.2 mm
Non-printable area:
•
1 mm from the front label edge (1st edge in feed direction) and
•
1 mm from the left band border (right border in feed direction).
Exact: 304.8 dpi
Print speed
(inch/s)
2 to 16
2 to 14
2 to 9
Setting of parameter „Transport mode"
Ribbon
auto-
„Dispenser
econ. motor"
Off 12 "/s
On 8 "/s
Off 12 "/s
On 8 "/s
Off 10 "/s
On 8 "/s
Technical Data
„Dual „Printer
motors" motor"
12 "/s 16 "/s
12 "/s 16 "/s
12 "/s 14 "/s
12 "/s 14 "/s
10 "/s 9 "/s
10 "/s 9 "/s
6