Maintenance
Every 500 hours of operation
Engine oil and engine oil filter - change
To perform the following tasks, the dozer and boom must be positioned in the forward direction of
travel.
The engine oil change must be carried out while the engine is warm.
Caution: The engine oil and the oil filter are very hot Risk of scalding.
STOP
Place an oil pan with a capacity of approx. 15 litres under the engine oil drain. The engine oil should
not be allowed to seep into the soil and it must be discarded like the oil filter in accordance with the
applicable environment protection regulations.
Open the engine compartment cover (page 120).
Engine oil - drain
Remove the oil drain plug (1) and let the engine oil drain into
the drain pan.
Install the oil drain plug using a new seal.
Engine oil filter - change
Place an oil pan under the oil filter (1). Remove the oil filter us-
ing a filter wrench (turn anticlockwise).
Coat the sealing ring of the new oil filter with engine oil.
Install and tighten the oil filter by hand. Do not use the filter
wrench.
RH418-8135-3
07/2015
1
1
135