Falarm Rec Mode Set Menu; Alarm Rec Mode Set Setting - Sanyo DSR-3016 Instruction Manual

RECORDING SETTING
ALARM REC MODE SET menu
F
These settings relate to alarm recording.
Sub-menu

ALARM REC MODE SET setting

This lets you set the recording quality, recording method (frame or
field), audio recording and recording speed for the alarm recording
area.
MENU
1
Press the MENU button to select RECORD SET, and then turn
the shuttle dial clockwise.
The RECORD SET sub-menu appears, and the cursor moves to
RECORDING AREA SET.
2
Use the jog dial to move the cursor to ALARM REC MODE
SET, and then turn the shuttle dial clockwise.
The ALARM REC MODE SET sub-menu appears, and the cursor
is positioned at PICTURE QUALITY.
English
Changes the image quality setting.
Changes the audio recording settings.
Changes the alarm recording settings.
Changes the ALARM INTERLEAVE setting.
Selects the recording method for
alarm images.
Selects which recording method to
use for recording images.
SW Alarm
Alarm
ONLY
Recording continues until alarm is canceled
Specifies the program number for program recording.
The recording cycle (recording speed) and the alarm duration time.
Changes the settings for pre-alarm recording.
Sets the recording rate (recording speed) and the alarm duration time
for pre-alarm recording.
Sets alarm triggers.
3
Turn the shuttle dial clockwise.
"ENHANCED" flashes.
4
Use the jog dial to select the image quality (example: " SUPER
FINE" ), and then turn the shuttle dial clockwise.
The cursor moves to AUDIO RECORDING.
Note: The maximum number of images that can be recorded based
on the various alarm recording settings is shown below.
=> (30721 ALARMS CAN BE RECORDED)
(Image quality settings)
BASIC (BQ): (15 KB)
NORMAL (NQ): (22 KB)
ENHANCED (EN): (30 KB)
FINE (FI): (42 KB)
SUPER FINE (SF): (56 KB)
59
Alarm
Multiple alarm recording images are
recorded alternately.
Alarm canceled