Loading Saved Menu Settings - Sanyo DSR-3016 Instruction Manual

SAVING MENU SETTING DETAILS

Loading saved menu settings

This procedure loads menu setting details that have been saved onto
a CompactFlash card into the digital video recorder.
Note: When loading the settings into the digital video recorder, you
can select whether to load recording area settings also.
If you read different menu settings into a digital video recorder
which already has images recorded onto its hard disk, the
recording areas will be automatically initialized, and all images
that have already been recorded will be lost. Therefore, you
should normally select "NO" for the COPY RECORDING AREA
SETTINGS item. If you select "YES" and then load the menu
settings, it will cause the hard disk initialization to start, and so
the administrator's password entry screen will appear.
1
Turn the jog dial to select LOAD MENUS FROM CF, and then
turn the shuttle dial clockwise.
The WARNING screen will appear to let you confirm the loading.
2
To load the settings, use the jog dial to display " YES" , and
then turn the shuttle dial clockwise.
Loading will then start. When saving is complete, LOADING
FINISHED!! will be displayed.
English
If copying the recording area settings
This describes how to copy the recording area settings.
Normally you should set COPY RECORDING AREA SETTINGS to
"NO".
1
To copy the settings, use the jog dial to set COPY
RECORDING AREA SETTINGS to " YES" and turn the jog dial
to select " LOAD MENUS FROM CF" , and then turn the shuttle
dial clockwise.
2
To copy the settings, use the jog dial to select " YES" in the
WARNING screen, and then turn the shuttle dial clockwise.
Copying will then start. When copying is complete, SAVING
FINISHED!! will be displayed.
89