Sanyo DSR-3016 Instruction Manual page 30

SEARCHING FOR RECORDED IMAGES
Alarm search
All alarm recording images in the alarm recording area can be
searched for and played back. If pre-alarm images have is recorded,
the images immediately before the alarms can also be played back.
1
Press the SEARCH button during recording or when the
digital video recorder is stopped.
The SEARCH screen appears.
SEARCH
2
Use the jog dial to select ALARM SEARCH and then turn the
shuttle dial clockwise.
The ALARM SEARCH screen appears.
1
NO: Alarm number appears.
2
DATE/TIME: The date and time that the alarm was received
and the images were recorded appears.
3
CH: The channel (camera number) which received the alarm
appears.
4
TOTAL ALARMS: The total number of alarm images recorded
appears.
3
Use the jog dial to move the cursor in order to select the
images to be played back.
The selected alarm image appears in the preview screen.
Note:
Up to eight items of alarm information can be displayed on the
ALARM SEARCH screen. When the jog dial is turned, the previous
or next alarm information screen appears.
If the alarm date and time being searched for is far away from the
current position, you can press the forward or back ALARM
buttons to continually skip through 5 screens at a time.
To end this search mode, press the SEARCH button.
English
1 2 3 4
4
Turn the shuttle dial clockwise.
The preview image appears in a single-screen display and
playback starts.
Note:
You can also use the shuttle dial or jog dial to carry out operations
such as pausing and fast-forward playback.
Alarm search starts playback from the image that was recorded at
the instant the alarm occurred, so if you are viewing pre-alarm
images, use the shuttle operations to carry out rewind playback.
Alarm search only plays back alarm images for a single event.
When playback of the event is complete, playback stops. If you
would like to play back the next alarm, press an ALARM button.
Alarm search 2
1
Press an ALARM button during playback.
If you press the û button, playback skips to the previous
alarm image.
If you press the ù button, playback skips to the next alarm
image.
ALARM
Note: When playing back images using alarm search, the playback
will pause at the start and at the end of each alarm recording.
Use the ALARM buttons to play back previous and subsequent
alarm recordings.
29