Rec Mode Set; Rec Mode Set> Setting Items - Sanyo DSR-M810PA Instruction Manual

2

REC MODE SET

<REC MODE SET> setting items
<MAIN MENU>
[Settings] ( indicates initial setting.)
Item
(1) REC/PB TIME
PICTURE
(2)
QUALITY
AUDIO
(3)
RECORDING
(4) OVER WRITE
(5) SERIES REC
(6) ALARM MODE
ALARM
(7)
DURATION
(8) VIDEO LOSS
(9) AUTO DELETE
When item (4) "OVER WRITE" is set to "OFF" and the hard disk becomes full, the digital video recorder performs the
operation set by item "DISK FULL RESET". For how to start recording again, see "Starting recording again when the FULL
indicator lights" on P. 30.
(5) "SERIES REC" can be set when "OVER WRITE" is "OFF".
English
Setting
- Displays the possible recording time.
Super highest image quality. Recording time: approx. 140 hours (300GB), approx. 56 hours
SUPER+
(120GB).
SUPER Highest image quality. Recording time: approx. 210 hours (300GB), approx. 84 hours (120GB).
HIGH High image quality. Recording time: approx. 420 hours (300GB), approx. 168 hours (120GB).
STANDARD Standard image quality. Recording time: approx. 840 hours (300GB), approx. 336 hours (120GB).
ON Audio recording is performed.
OFF Audio recording is not performed.
When the hard disk runs out of space, recording automatically starts again from the
ON
beginning, recording over previously recorded images.
When the hard disk runs out of space, FULL indicator flashes and recording stops.
OFF
To begin recording again, set "DISK FULL RESET" to "YES". ( P.30)
OFF Series recording is not performed.
When multiple digital video recorders are connected, about 1 minute before the first
-1M
recorder's hard disk becomes full, the second recorder's hard disk starts recording.
When multiple digital video recorders are connected, about 2 minutes before the first
-2M
recorder's hard disk becomes full, the second recorder's hard disk starts recording.
When multiple digital video recorders are connected, about 3 minutes before the first
-3M
recorder's hard disk becomes full, the second recorder's hard disk starts recording.
OFF Alarm recording is not performed.
ENABLED Alarm recording is always performed, during timer recording or other recording.
AL-REC ON
Alarm recording is only performed during timer recording.
TIMER
AL-REC OFF
Alarm recording is performed only during recording types other than timer recording.
TIMER
OLY AL-RC
Alarm recording is performed only during timer recording. Normal recording is not performed.
ON TMR
Time selections: CC/5SEC/10SEC/20SEC( )/40SEC/1MIN/2MIN/3MIN/4MIN/5MIN/10MIN/15MIN
Sets the amount of time for recording when a single alarm is received.
"VIDEO LOSS" is displayed on the screen when the camera image is interrupted.
ON
The WARNING signal is also output to a rear panel terminal.
OFF "VIDEO LOSS" is not displayed on the screen when the camera image is interrupted.
Duration selections: OFF ( ), 1 DAYS to 99 DAYS
Sets a storage period for recorded data. When the set period has expired, the corresponding data will be
automatically deleted.
(1)
(2)
(3)
(4)
Description
29
(5)
(6)
(7)
(8)
(9)