Btimer Settings - Sanyo DSR-3016 Instruction Manual

INITIAL SET MENU
EXT. CLOCK SET setting
(default setting: 01:00)
If more than two devices are connected at the same time, the time
settings (ADJUST TIME) for the digital video recorder are also applied
to these devices.
1
Connect the other devices to the input terminal (CLOCK SET
IN) and output terminal (CLOCK SET OUT) at the rear of the
digital video recorder.
REMOTE
C R1 R2 C
2
Turn the jog dial to move the cursor to the ADJUST TIME
setting in the EXT. CLOCK SET menu, and then turn the
shuttle dial clockwise.
"01" flashes.
3
Turn the jog dial to set the hours (example: " 05" ), and then
turn the shuttle dial clockwise.
4
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
CLOCK SET IN
Other peripheral equipment
(such as DRS-3000)
TIMER settings
B
(default setting: 00:00)
The timer function uses two separate timer settings (TIME PERIOD A
and TIME PERIOD B), and each timer setting can be made in four
time zones (example: midnight, morning, daytime, night).
For example, TIME PERIOD A time zones can be set for automatic
screen switching and TIME PERIOD B time zones can be set for gray
pattern cover on camera images.
Morning
6:00 – 11:00
Images from cameras
1, 3, 5 and 6 are
switched automatically
Daytime
Timer 2
11:00 – 13:00
Images from cameras
8, 9, 10 and 16 are
switched automatically
Night
18:00 – 6:00
Images from cameras
4, 6, 9, 12 and 16 are
switched automatically
46
Timer 1
Timer 3
13:00 – 18:00
Images from cameras
7, 11, 12 and 13 are
switched automatically
Timer 4
English