Sanyo DSR-3016 Instruction Manual page 31

SEARCHING FOR RECORDED IMAGES
Alarm thumbnail search
Alarm images can be searched for and played back from thumbnails.
All alarm images recorded in the alarm recording area are displayed
as thumbnails.
1
Press the SEARCH button during recording or when the
digital video recorder is stopped.
The SEARCH screen appears.
SEARCH
2
Use the jog dial to select ALARM THUMBNAIL SEARCH and
then turn the shuttle dial clockwise.
The last nine alarm recording images recorded appear.
The alarm number appears with each alarm recording image, and
the alarm number of the currently-selected alarm image flashes.
3
Use the jog dial to move the cursor in order to select the
images to be played back.
The alarm number of the currently-selected alarm image flashes.
Note:
Up to nine items of alarm information including thumbnails can be
displayed. When the jog dial is turned, the previous or next alarm
information screen appears.
To end this search mode, press the SEARCH button.
4
Turn the shuttle dial clockwise.
The selected image appears in a single-screen display and
playback starts.
Note:
You can also use the shuttle dial or jog dial to carry out operations
such as pausing and fast-forward playback.
Only the contents of each alarm can be played back, in the same
way as for alarm searching. Use the ALARM buttons to play back
previous and subsequent alarm recordings.
Time/date search
The recording date and time for images in the normal recording area
(normal recording and timer recording images) and in the alarm
recording area of the hard disk can be specified and the images can
be played back.
1
Press the SEARCH button during recording or when the
digital video recorder is stopped.
The SEARCH screen appears.
SEARCH
30
English