Pre-Alarm Recording - Sanyo DSR-3016 Instruction Manual

RECORDING IMAGES IN THE ALARM
RECORDING AREA

Pre-alarm recording

1
Setting the time
Press the MENU button to display the LANGUAGE/CLOCK SET
menu, and set the date and time. After the setting has been made,
press the EXIT/OSD button, the date and time appear in the
operating display. (See page 44.)
MENU
2
Set pre-alarm recording.
Press the MENU button to display the ALARM REC MODE SET
menu. Set ALARM RECORDING to the desired alarm recording
setting (example: ENABLED). The *** setting for PRE-ALARM
RECORDING will be set to "OFF", so change it to "ON". (See page
62.)
Press the EXIT/OSD button to return to the normal screen. "PRE"
appears in the operating display, the ALARM indicator illuminates
and pre-alarm recording starts (the REC mark does not appear).
The same monitored image as in the normal recording area is
recorded repeatedly in the alarm recording area.
Recording onto the hard disk proceeds automatically (default
setting) according to the following settings. The settings can be
changed between long-period recording and high-quality recording
in five steps. (See page 59.)
Hard disk recording areas:
Normal recording area: 80%
Alarm recording area: 19%
Archive area: 1%
Picture quality: EN (Enhanced)
Recording speed: 10 FPS (67H)
REC/STOP
ALARM
English
Pre-alarm images
are recorded
3
When an alarm is received, pre-alarm recording stops
automatically and the alarm images are recorded.
The "PRE" disappears from the operating display, "ALARM"
flashes and the ALARM indicator flashes.
ALARM
23
Monitored images
are recorded