Amulti Screen Setting - Sanyo DSR-3016 Instruction Manual

SCREEN SETTING
MULTI SCREEN setting
A
The order in which camera images are displayed in 4-screen,
9-screen and 16-screen displays can be set as desired.
Note: The same camera image cannot be displayed more than once
on the same screen.
Example 1: To display camera 1 image on cameras
06, 11, 16 (in a 4-screen display)
The DSR-3009 model can display only cameras 01 to 09.
MENU
1
Press the MENU button to select SCREEN SET, and then turn
the shuttle dial clockwise.
The SCREEN SET sub-menu appears, and the cursor is
positioned at MULTI SCREEN.
2
Turn the shuttle dial clockwise, use the jog dial to change the
MULTI SCREEN setting to " CHANGE" , and then turn the
shuttle dial counterclockwise.
The cursor moves to MULTI SCREEN SET.
Display examples:
NORMAL: The order of camera images is not rearranged.
CHANGE: Select when changing the order of the camera
images.
3
Turn the shuttle dial clockwise.
The QUAD POSITION SET sub-menu appears.
4
Turn the shuttle dial clockwise, use the jog dial to select
" QUAD" , and then turn the shuttle dial clockwise.
"01" flashes.
5
Use the jog dial to move the cursor to camera number " 06" ,
and then turn the shuttle dial clockwise.
"06" flashes.
Note: This can also be set using the numeric keys. (See page 43.)
English
6
Use the jog dial to set " 01" , and then turn the shuttle dial
clockwise.
"06" changes to "01".
7
Repeat steps 4 and 5 above to set " 11" and " 16" to " 01" .
"11" and "16" change to "01".
Note: If you select CHECK THE SCREEN at the bottom of the
screen, you can check the revised layout of the screens.
Display examples:
8
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
81
1 – 4 9 – 12
5 – 8 13 – 16