Rec Mode Set; Rec Mode Set> Setting Items - Sanyo DSR-M800 Instruction Manual

e_dsr_m800.book Page 27 Friday, January 31, 2003 5:45 PM
2

REC MODE SET

<MAIN MENU>
<REC MODE SET> setting items
(1)
(2)
(3)
(4)
(5)
(6)
(7)
[Settings] ( indicates initial setting.)
Item
PICTURE
(1)
QUALITY
AUDIO
(2)
RECORDING
(3) OVER WRITE
DISK FULL
(4)
RESET
(5) ALARM MODE
ALARM Time selections: CC/5S/10S/20S( )/40S/1M/2M/3M/4M/5M/10M/15M
(6)
DURATION Sets the amount of time for recording when a single alarm is received.
(7) VIDEO LOSS
* When item (3) "OVER WRITE" is set to "OFF" and the hard disk becomes full, the digital video recorder performs the
operation set by item (4) "DISK FULL RESET". For how to start recording again, see "Starting recording again when the
FULL indicator lights" on page 28.
27
Setting
SUPER Highest image quality. Recording time: 84 hours or more (120 GB). 168 hours or more (240 GB).
HIGH High image quality. Recording time: 168 hours or more (120 GB). 336 hours or more (240 GB).
STANDARD Standard image quality. Recording time: 336 hours or more (120 GB). 672 hours or more (240 GB).
ON Audio recording input
OFF No audio recording input
When the hard disk runs out of space, recording automatically starts again from the
ON
beginning, recording over previously recorded images.
OFF* When the hard disk runs out of space, FULL indicator flashes and recording stops.
Images are not recorded over previously recorded images.
NO
The <WARNING> screen appears, and "NO" flashes.
Images can be recorded over previously recorded images once.
YES
The <WARNING> screen appears. Press the [
OFF No alarm recording
ENABLED Alarm recording is always performed, during timer recording or other recording.
AL-REC ON
Alarm recording is only performed during timer recording.
TIMER
AL-REC OFF
Alarm recording is performed only during recording types other than timer recording.
TIMER
OLY AL-RC
Alarm recording is performed only during timer recording. Normal recording is not performed.
ON TMR
"VIDEO LOSS" is displayed on the screen when the camera image is interrupted. The
ON
WARNING SIGNAL is also output to a rear panel terminal.
OFF "VIDEO LOSS" is not displayed on the screen when the camera image is interrupted.
Description
] or [ ] button to select "YES".