Front Panel Connector (J11); I2C (J51); Table 20: Front Panel Connector; Table 21: I2C Header (J51) - Kontron COMe Eval Carrier T7 User Manual

5.16. Front Panel Connector (J11)

Figure 20: Front Panel Connector

Table 20: Front Panel Connector

Pin Signal Name
1 SATA_LED+
2 POWER_LED+
3
SATA_ACT#
4 GND
5 GND
6 GND
7 SYS_RESET_R#
8
GND
9 V_5V0_S0

5.17. I2C (J51)

The I2C Interface supports clock from 127 Hz to 400 kHz (limited by on board devices and capacitive loading) and
can be configured in Setup.

Figure 21: I2C header with four pins

Table 21: I2C Header (J51)

Pin Description
1 V_3V3_S5
2 I2C_DAT
3 I2C_CLK
4 GND
www.kontron.com
COMe Eval Carrier T7 (A2T7) User Guide Rev 1.1
// 35