Storage - Goodwe HT Series User Manual

04 Check and Storage
• The number of PV connectors and the PV terminals in the inverter is the same.
• The type and number of the communication connector are decided by the selected
communication method.
• Communication module types: Bulethooth, etc. The actual module delivered depends on
the communication method of the selected inverter.
• The number of expansion bolts, screws, pin terminals are various depending on different
inverters. The actual accessories may differ.
• The tool will only be delivered in Korea.
• The RS485-USB cable will only be delivered in Brazil.

4.3 Storage

If the equipment is not to be installed or used immediately, please ensure that the storage
environment meets the following requirements:
1. Do not unpack the outer package or throw the desiccant away.
2. Store the equipment in a clean place. Make sure the temperature and humidity are
appropriate and no condensation.
3. The height and direction of the stacking inverters should follow the instructions on the
packing box.
4. The inverters must be stacked with caution to prevent them from falling.
5. If the inverter has been long term stored, it should be checked by professionals before being
put into use.
NOTICE
14
User Manual V1.0-2022-05-04