Indoor/Outdoor Reset Operation Configuration - Watts AERCO EXT Installation, Operation & Maintenance Manual

Ufly Controller and BCM for Modulex EXT
CHAPTER 4: UFLY SETUP AND PROGRAMMING

4.1.2 Indoor/Outdoor Reset Operation Configuration

The Indoor/Outdoor Reset Mode is configured in the Heating Menu as follows:
I M P O R T A N T !
The outdoor air sensor MUST be connected as described in Section 4.1.1 above, prior to
configuring the Controller for Indoor/Outdoor Reset Mode operation.
1. Access the Heating menu from the Home Screen or from Main Menu.
Home Screen
2. If there is more than one heating circuit in the system, select the one to be setup
for outdoor reset.
ch13
ch 13
ch ....
3. Click the settings icon.
Ch13
21 3
18 6
15 9
12
Comfort
Time program
68
room
4. Toggle ON "Outdoor Reset"
5. The parameters that will be used to create a temperature curve to vary the unit's
setpoint based on the Outside Air Temperature will become accessible.
OMM-0159_A_A • 6/28/2022
°F
status
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Menu
Main Menu
Page 22 of 83